Active Directory · Troubleshooting

Troubleshooting AD Replication Event ID 2042: Resolving Tombstone Lifetime Exceeded and Error 8614

Diagnose and resolve Active Directory Event ID 2042 and Win32 replication error 8614 when a disconnected domain controller exceeds the forest tombstone lifetime, preventing lingering object resurrection.

By K Shankar R Karanth Active Directory Troubleshooting Tested on: Windows Server 2025, DFL 2025, PowerShell 7.4, Pester 5.5
Quick idea: Event ID 2042 and Win32 replication error 8614 indicate that a domain controller has been disconnected or failing replication longer than the Active Directory tombstone lifetime (default 180 days). To prevent deleted objects from resurrecting as lingering objects across the forest, inbound replication is halted. In production, the safest fix is to decommission and demote the stale DC followed by metadata cleanup; if the server must be retained, you must enable strict replication consistency, purge lingering objects with repadmin /removelingeringobjects, and temporarily bypass the block using the Allow Replication With Divergent and Corrupt Partner registry override.
Tombstone Lifetime

The forest-wide retention window (default 180 days) during which deleted objects reside in Deleted Objects before garbage collection expunges them.

Event ID 2042 & Error 8614

The safety tripwire. Triggered when elapsed time since the last successful replication exceeds the TSL, halting inbound synchronisation immediately.

Lingering Objects

Zombie objects that exist on the stale DC but were purged elsewhere. Strict consistency blocks partition synchronisation to prevent zombie resurrection.

The War Story: When an Old DC Reappears

It is 03:30 AM during a routine datacentre consolidation audit when a neglected virtual domain controller in a remote branch office is powered back on after eight months of network isolation. Within twenty minutes, replication monitors flash red across the forest: domain controllers in the central site begin logging Event ID 2042 in their Directory Service logs, and repadmin /showrepl reports Win32 error 8614: “The Active Directory cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.” The directory has triggered its ultimate defensive tripwire to protect itself from zombie data resurrection.

Think of Active Directory replication and the tombstone lifetime like a distributed inventory system where deleted records are posted on a physical noticeboard for 180 days before being shredded into the recycling bin. If every warehouse staff member talks to each other every week, everyone reads the deletion notices and marks their local ledgers accordingly. But if a remote depot is cut off for nine months, all the deletion notices back at headquarters have long since been shredded and forgotten. If that isolated depot suddenly reconnects and starts broadcasting its outdated ledger, headquarters would mistakenly interpret those obsolete records as brand-new items and restock them across the entire company. To stop this catastrophe, the head office security guard slams the loading bay door shut the moment the depot’s timestamp shows it has been gone longer than the 180-day retention window.

When this tripwire fires, replication with that partner stops completely across all directory partitions—Schema, Configuration, Domain, and DNS application partitions. If left unhandled, administrator passwords, group policy updates, and Kerberos ticket changes stop synchronising, leading to authentication splits, stale DNS records, and inconsistent authorization decisions across sites.

What the Errors Look Like

When a domain controller crosses the tombstone lifetime threshold without replicating, the Windows Event Log records distinct warning and error entries in the Directory Service event log. Understanding the exact text and the embedded numeric error code is the fastest way to verify the condition.

Event ID 2042 payload: Logged by source ActiveDirectory_DomainService or NTDS Replication with task category Replication.
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          2026-10-30 02:15:22
Event ID:      2042
Task Category: Replication
Level:         Error
Computer:      DC01.corp.example.com
Description:
It has been too long since this machine last replicated with the named source machine.
The time between replications with this machine has exceeded the tombstone lifetime.
Replication has been stopped with this machine.

The reason that replication is not allowed to continue is that the two machines' views
of deleted objects may now be different. The source machine may still have copies of
objects that have been deleted (and garbage collected) on this machine. If they replicate,
the source machine may resurrect objects that have already been deleted.

Source machine:
CN=NTDS Settings,CN=DC02,CN=Servers,CN=Branch-Office,CN=Sites,CN=Configuration,DC=corp,DC=example,DC=com
Directory partition:
DC=corp,DC=example,DC=com
Tombstone lifetime (days):
180
Time since last replication (days):
248

User Action:
Identify which of the two machines was disconnected from the forest and is now out of date.
Remove this machine from the forest or re-install the operating system.

At the command line, running standard Active Directory replication inspection tools yields the unmistakable Win32 error code 8614 (0x21a6):

# Inspect replication status for the incoming partner
repadmin /showrepl DC01.corp.example.com /verbose
CN=Configuration,DC=corp,DC=example,DC=com
    Branch-Office\DC02 via RPC
        DSA object GUID: f91c7843-1e5b-4861-a024-9b2e04f9812a
        Last attempt @ 2026-10-30 02:15:22 failed, result 8614 (0x21a6):
            The Active Directory cannot replicate with this server because the
            time since the last replication with this server has exceeded the
            tombstone lifetime.
        214 consecutive failure(s).
        Last success @ 2026-02-24 14:10:05.

Running dcdiag highlights the failure during the Replications test suite:

# Run the replication test on the destination DC
dcdiag /test:Replications /v
Starting test: Replications
   [Replications Check,DC01] Inbound replication test failed:
   From DC02 to DC01
   Naming Context: DC=corp,DC=example,DC=com
   The replication generated an error (8614):
   The Active Directory cannot replicate with this server because the time since
   the last replication with this server has exceeded the tombstone lifetime.
   ......................... DC01 failed test Replications

The Architecture Behind the Tripwire

To understand why Active Directory takes such an aggressive defensive stance, we must examine the internal lifecycle of object deletion, garbage collection, and strict replication consistency.

The Deletion Lifecycle

When an administrator or script deletes an object in Active Directory—such as a user account, group, or computer—the object is not immediately purged from the local ntds.dit Jet database. Instead, Active Directory executes a multi-stage retirement workflow:

  1. Tombstone Transformation: The object’s isDeleted attribute is updated to TRUE. Most optional attributes (telephone numbers, street addresses, department) are stripped to reduce payload size. Crucial tracking attributes—including the objectGUID, objectSid, whenCreated, and usnChanged—are preserved.
  2. Relocation: The object is renamed and moved to the hidden CN=Deleted Objects container in the root of the naming context.
  3. Tombstone Lifetime Clock: The tombstone sits in this state for the duration specified by the forest’s tombstoneLifetime attribute. During this period, the tombstone replicates outbound to all other domain controllers, notifying them that the object has been deleted.
  4. Garbage Collection: A background maintenance task called the Garbage Collection process runs on every domain controller every 12 hours by default. When the garbage collector inspects the CN=Deleted Objects container, any tombstone whose age exceeds tombstoneLifetime is permanently expunged (swept) from the database.
Historical variance: Forests created on Windows 2000 and initial Windows Server 2003 releases configured a default tombstone lifetime of 60 days. Forests installed on Windows Server 2003 Service Pack 1, Windows Server 2008, 2012, 2016, 2019, 2022, and 2025 default to 180 days. If the tombstoneLifetime attribute is null/unset, modern versions default to 180 days.

The Danger of Lingering Objects

Now consider the failure scenario. Suppose a user account belonging to a terminated contractor is deleted on January 1st. Domain controllers DC01 and DC03 receive the tombstone. DC02 is a domain controller in a branch office whose WAN router suffered hardware failure, leaving DC02 powered on but completely disconnected.

By July 15th (more than 180 days later), DC01 and DC03 have long since run their garbage collection routines. The tombstone for the contractor is permanently gone from their databases. DC01 and DC03 have zero record that this contractor ever existed.

Meanwhile, DC02 still holds the contractor account in its database because it never received the tombstone notification. If DC02 were allowed to resume replication without restrictions, it would send its database updates to DC01. Because DC01 has no tombstone for the contractor, DC01 would interpret the contractor account as a newly created object. The contractor account would be resurrected across the forest. This revived record is called a lingering object.

Lingering objects pose severe operational and security threats:

  • Security Vulnerability: Revoked user accounts, former administrative credentials, and deprecated service accounts are revived, restoring unauthorized access paths.
  • Duplicate SPNs: Resurrected computer or service accounts conflict with newly created accounts, breaking Kerberos ticket grants across the enterprise.
  • Group Membership Inconsistencies: A user removed from a high-privilege group like Domain Admins or Enterprise Admins might be silently added back if the membership link resides on the divergent DC.

Strict vs. Loose Replication Consistency

To prevent lingering objects from spreading, Microsoft introduced Strict Replication Consistency. When strict consistency is enabled (the default for all forests deployed on Windows Server 2003 or later), a destination domain controller checks every incoming object against its local database. If the incoming object does not exist locally and no tombstone exists for it, the DC recognizes that the object was previously garbage-collected. Rather than accepting the resurrected object, the DC halts inbound replication for that partition from that specific partner and logs Event ID 1988.

Event ID 2042 is the macroscopic companion to strict consistency. Before individual objects are even evaluated, Event 2042 halts replication entirely if the calendar delta since the last successful sync exceeds the tombstone lifetime.

Step-by-Step Diagnostic Workflow

When Event 2042 appears, do not attempt immediate registry hacks. Follow this ordered diagnostic procedure to establish the exact scope of divergence, confirm network transport health, and calculate the age delta.

Step 1: Inspect Replication Latency and Error State with Repadmin

Run repadmin /replsummary from an elevated PowerShell console on a healthy central DC to inspect the forest-wide replication matrix. This provides an immediate visual summary of which domain controllers are failing and how many days have elapsed since their last successful synchronisation.

# Generate forest-wide replication summary
repadmin /replsummary
Replication Summary Start Time: 2026-10-30 02:20:10

Beginning data collection for replication summary, this may take a while:
  ......

Source DSA          largest delta    fails/total %%   error
 DC01                      14m:22s    0 /  10    0
 DC02                    248d:12h    10 /  10  100   (8614) The Active Directory cannot replicate with this server...

Destination DSA     largest delta    fails/total %%   error
 DC01                    248d:12h    10 /  10  100   (8614) The Active Directory cannot replicate with this server...
 DC02                      14m:22s    0 /  10    0

Notice the largest delta column: 248d:12h. This confirms that DC02 has been out of contact for 248 days, comfortably exceeding the 180-day threshold.

Step 2: Verify Network Ports & Firewall Reachability

Before deciding whether to revive or demote the stale DC, verify that basic RPC and directory communication ports are open and passing traffic. Network firewalls or perimeter ACLs that drop dynamic RPC ports are often the original root cause that allowed the DC to fall behind in the first place.

# Verify connectivity from destination DC to source DC across core AD DS ports
$TargetDC = "DC02.corp.example.com"
$Ports = @(135, 389, 445, 88, 53, 3268)

foreach ($Port in $Ports) {
    $Test = Test-NetConnection -ComputerName $TargetDC -Port $Port -WarningAction SilentlyContinue
    [PSCustomObject]@{
        ComputerName = $TargetDC
        Port         = $Port
        TcpTestSucceeded = $Test.TcpTestSucceeded
    }
}
ComputerName         Port TcpTestSucceeded
------------         ---- ----------------
DC02.corp.example.com  135             True
DC02.corp.example.com  389             True
DC02.corp.example.com  445             True
DC02.corp.example.com   88             True
DC02.corp.example.com   53             True
DC02.corp.example.com 3268             True
Port Protocol Direction Service Purpose in Replication
135 TCP Bidirectional RPC Endpoint Mapper Resolves dynamic high ports for Directory Service replication.
389 TCP / UDP Bidirectional LDAP Directory queries and rootDSE capability negotiation.
445 TCP Bidirectional SMB SYSVOL and Netlogon synchronisation.
88 TCP / UDP Bidirectional Kerberos Mutual authentication of computer accounts during replication.
49152-65535 TCP Bidirectional RPC Dynamic Ports Underlying high-range transport for DRS replication interfaces.

Step 3: Determine Forest Tombstone Lifetime and Up-To-Dateness Vectors

Confirm the exact tombstone lifetime configured in your forest by querying the Directory Service configuration object via PowerShell:

# Query forest-wide Tombstone Lifetime attribute
$ConfigNC = (Get-ADRootDSE).ConfigurationNamingContext
$DSObject = Get-ADObject -Identity "CN=Directory Service,CN=Windows NT,CN=Services,$ConfigNC" -Properties tombstoneLifetime
$TSL = if ($DSObject.tombstoneLifetime) { $DSObject.tombstoneLifetime } else { 180 }
Write-Output "Configured Tombstone Lifetime: $TSL days"
Configured Tombstone Lifetime: 180 days

Next, query the Up-To-Dateness Vector (UTDVEC) on the disconnected domain controller. The up-to-dateness vector records the highest Update Sequence Number (USN) that the DC has received from every replication partner across the enterprise:

# Inspect Up-To-Dateness Vector on the lagging domain controller
repadmin /showutdvec DC02.corp.example.com dc=corp,dc=example,dc=com /latency
London-HQ\DC01  @ USN 89140232 @ 2026-02-24 14:10:05
Branch-Office\DC02 @ USN 12048811 @ 2026-10-30 02:22:15

Comparing the timestamp of the last received USN against today’s date confirms the exact gap: 248 days. Because 248 is greater than 180, Active Directory is operating in strict accordance with specification by refusing synchronisation.

Step 4: Rule Out Clock Skew and Hypervisor Time Jumps

Occasionally, Event 2042 is triggered not because a server was actually disconnected for six months, but because a hypervisor snapshot restoration or CMOS clock failure jumped the system clock forward or backward by hundreds of days. Verify time synchronisation on both partner DCs:

# Check Windows Time service synchronization status
w32tm /query /status
Leap Indicator: 0(no warning)
Stratum: 2 (secondary reference - syncd by (S)NTP)
Precision: -23 (119.209ns per tick)
Root Delay: 0.0014205s
Root Dispersion: 0.0104118s
ReferenceId: 0x0A0A010A (source IP:  10.10.1.10)
Last Successful Sync Time: 2026-10-30 02:20:00
Source: DC01.corp.example.com
Poll Interval: 10 (1024s)

If the system clock on either DC shows an erroneous date far in the future, correct the system time and Windows Time configuration before undertaking any directory repairs.

Common Causes and Diagnostic Indicators

Review this reference table to map symptoms, confirmation tests, and verified resolutions for Event 2042 occurrences:

Cause How to Confirm Fix
Offline Beyond TSL (180+ Days) repadmin /replsummary shows largest delta greater than 180 days. Decommission and force-demote the offline server using Uninstall-ADDSDomainController -ForceRemoval, followed by metadata cleanup.
Blocked RPC or Dynamic Ports Test-NetConnection -Port 135 or high RPC port sweep fails between DCs. Update perimeter firewall access rules to permit TCP port 135 and the dynamic RPC port range (49152-65535) between domain controllers.
Snapshot Inversion / USN Rollback Event ID 2095 in Directory Service log; DSA invocation ID mismatched in UTDVEC. Immediately isolate the reverted VM; permanently demote it and restore Active Directory using authoritative system-state backups.
Hypervisor Time Drift / Clock Leap w32tm /query /status reports dates mismatched by months against NTP stratum. Disable VM time integration services on the hypervisor host and resynchronise the Windows Time service using w32tm /resync /force.
Loose Replication Consistency Replication proceeds silently, followed by Event ID 1988 on partner DCs. Enforce strict replication consistency across all forest domain controllers using repadmin /regkey * +strict.
Branch WAN Link Failure Network link down for months; DC remained powered on locally servicing logons. Establish clean WAN routing, audit lingering objects in advisory mode, and execute the surgical recovery procedure.

The Remediation Playbook: Demote vs. Resuscitate

When dealing with a domain controller that has breached the tombstone lifetime, you face an architectural fork in the road:

  • Path A (The Enterprise Standard): Force-demote the outdated DC, clean its metadata, and deploy a fresh replacement. This is the zero-risk path endorsed by Microsoft.
  • Path B (The Surgical Restoration): Purge lingering objects manually using repadmin /removelingeringobjects, temporarily enable the divergent partner registry override, force synchronisation, and immediately restore the safety block.
Production rule: Unless the isolated domain controller is located on a remote research vessel with satellite bandwidth constraints or holds irreplaceable third-party software bound to the local operating system, always choose Path A. Re-promoting a clean Windows Server virtual machine takes less than 15 minutes and carries zero risk of corrupting the directory database with lingering objects.

Path A: Force Demotion and Clean Metadata (Recommended)

If you choose Path A, treat the lagging domain controller as permanently decommissioned.

First, log in to the isolated domain controller (DC02) and execute a forced demotion to strip Active Directory Domain Services from the server:

# On the isolated DC (DC02): Force-demote the domain controller
Uninstall-ADDSDomainController -ForceRemoval -Confirm:$false
Production note: If the operating system on the lagging DC is inaccessible or corrupted, simply power the machine off permanently. Do not attempt to re-connect it to the network.

Next, log in to a healthy domain controller (DC01) in your primary datacentre and perform an automated metadata cleanup to remove all database references, NTDS settings, and replication topology objects associated with the decommissioned DC:

# On a healthy DC (DC01): Perform metadata cleanup of the stale DC object
Remove-ADDomainController -Identity "DC02" -Confirm:$false

Older environments or complex multi-domain forests can execute metadata cleanup manually via ntdsutil:

# Alternative interactive metadata cleanup using ntdsutil
ntdsutil
metadata cleanup
connections
connect to server DC01.corp.example.com
quit
select operation target
list domains
select domain 0
list sites
select site 0
list servers in site
select server 1
quit
remove selected server
quit
quit

Finally, clean up residual DNS records. Open DNS Manager (dnsmgmt.msc) or run PowerShell to delete any lingering records associated with DC02:

  • The CNAME (Alias) record under _msdcs.corp.example.com matching the DC’s DSA object GUID (f91c7843-1e5b-4861-a024-9b2e04f9812a).
  • SRV records in _msdcs.corp.example.com under dc\_sites\<SiteName>\_tcp.
  • Host (A) and IPv6 (AAAA) records in the forward lookup zone.

Path B: Surgical Recovery and Lingering Object Removal

If business constraints dictate that DC02 must be brought back into production without reinstalling, you must purge all lingering objects before enabling replication. Follow this surgical sequence precisely.

Step 1: Enforce Strict Replication Consistency Forest-Wide

Ensure that all domain controllers have strict consistency enabled. This guarantees that if any lingering object escapes detection, partners will halt replication rather than corrupting their databases.

# Enforce strict replication consistency across all forest DCs
repadmin /regkey * +strict
Repadmin: running command /regkey against full DC list
DC01.corp.example.com: HKLM\System\CCS\Services\NTDS\Parameters: "Strict Replication Consistency" set to 1.
DC02.corp.example.com: HKLM\System\CCS\Services\NTDS\Parameters: "Strict Replication Consistency" set to 1.

Step 2: Audit Lingering Objects in Advisory Mode

Identify lingering objects on the stale DC by comparing its directory partition against an authoritative reference DC (DC01). Obtain the DSA Object GUID of the healthy DC:

# Query the DSA Object GUID of the healthy reference DC
(Get-ADDomainController -Identity "DC01.corp.example.com").InvocationId
d4a8e48b-302a-4638-a5ec-974d758bc69b

Now run repadmin /removelingeringobjects targeting the stale DC (DC02), referencing the healthy DC’s GUID, using the /advisory_mode parameter:

# Run lingering object discovery in advisory mode (read-only audit)
repadmin /removelingeringobjects DC02.corp.example.com d4a8e48b-302a-4638-a5ec-974d758bc69b dc=corp,dc=example,dc=com /advisory_mode

Inspect the Directory Service event log on DC02. For every lingering object discovered, Active Directory records Event ID 1988 detailing the object’s Distinguished Name and GUID, without deleting it.

Step 3: Permanently Purge Lingering Objects

Once you have reviewed the objects in advisory mode and confirmed they represent deleted accounts, run the command again without /advisory_mode across all directory partitions (Domain, Configuration, Schema, and DNS partitions):

# Purge lingering objects from the Domain naming context
repadmin /removelingeringobjects DC02.corp.example.com d4a8e48b-302a-4638-a5ec-974d758bc69b dc=corp,dc=example,dc=com

# Purge lingering objects from the Configuration naming context
repadmin /removelingeringobjects DC02.corp.example.com d4a8e48b-302a-4638-a5ec-974d758bc69b cn=configuration,dc=corp,dc=example,dc=com

Active Directory logs Event ID 1984 when removal begins and Event ID 1985 upon successful completion of the purge.

Step 4: Apply the Emergency Registry Override

Now that the stale DC has been cleansed of lingering objects, you must bypass the Event 2042 safety block to allow replication to resume. On the destination domain controller that logged Event 2042, set the Allow Replication With Divergent and Corrupt Partner DWORD to 1:

# On the destination DC: Temporarily allow divergent replication
Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\NTDS\Parameters" `
  -Name "Allow Replication With Divergent and Corrupt Partner" -Value 1 -Type DWord

Step 5: Force Inbound Replication

Trigger manual replication for each partition from the healthy partner:

# Force replication of the domain partition
repadmin /replicate DC01.corp.example.com DC02.corp.example.com dc=corp,dc=example,dc=com /force

# Force replication of the configuration partition
repadmin /replicate DC01.corp.example.com DC02.corp.example.com cn=configuration,dc=corp,dc=example,dc=com /force
Sync from DC02 to DC01 completed successfully.

Step 6: Immediately Remove the Registry Override

Do not leave the emergency override in place. Leaving this setting enabled strips the forest of future protection against accidental replication with corrupt DCs.

# Remove the emergency override registry parameter immediately
Remove-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\NTDS\Parameters" `
  -Name "Allow Replication With Divergent and Corrupt Partner" -Confirm:$false

Step 7: Validate Health

Confirm that replication is fully functional and error 8614 has disappeared:

# Validate replication health post-fix
repadmin /showrepl DC01.corp.example.com
CN=Configuration,DC=corp,DC=example,DC=com
    Branch-Office\DC02 via RPC
        DSA object GUID: f91c7843-1e5b-4861-a024-9b2e04f9812a
        Last attempt @ 2026-10-30 02:45:10 was successful.

How to Prevent Recurrence

Preventing Event 2042 requires operational governance, proactive replication monitoring, and hypervisor hygiene.

  • Establish Early-Warning Alerts: Do not wait for replication to fail for 180 days. Configure monitoring systems (SCOM, Prometheus, Datadog, or scheduled jobs) to alert if any domain controller fails replication for more than 7 consecutive days.
  • Enforce Strict Consistency in Baseline Images: Ensure all new domain controllers have Strict Replication Consistency enabled during post-deployment provisioning.
  • Disable Hypervisor Time Integration: On virtualised domain controllers running on Hyper-V, VMware ESXi, or Proxmox VE, disable host-to-guest time synchronisation to prevent VM snapshot or host clock shifts from corrupting the guest OS clock. Domain controllers must synchronise time exclusively through the Active Directory domain hierarchy via NTP.

Automated Prevention Test with Pester

Incorporate this automated Pester 5.x integration test into your synthetic monitoring suite. It audits replication partners across all domain controllers and fails immediately if any partner’s replication delta exceeds 14 days—months before approaching the tombstone threshold:

# Pester 5.5 replication latency test
Describe 'Active Directory Replication Health' {
    It 'Ensures no replication partner exceeds the 14-day safety threshold' {
        $MaxAllowedDays = 14
        $ReplicationFailures = Get-ADReplicationPartnerMetadata -Target (Get-ADDomainController).HostName -Scope Server |
            Where-Object { (New-TimeSpan -Start $_.LastReplicationSuccess -End (Get-Date)).Days -gt $MaxAllowedDays }
        
        $ReplicationFailures | Should -BeNullOrEmpty -Because "Replication latency exceeding $MaxAllowedDays days risks tombstone lifetime expiration"
    }
}

Final Thoughts

Active Directory replication failures are often frustrating, but Event ID 2042 is unique: it is not a bug or a silent failure, but the directory’s built-in immune response protecting forest data integrity. When a disconnected domain controller re-emerges after months of isolation, halting replication is the only mechanism that prevents deleted credentials, revoked security groups, and stale records from resurrecting across the enterprise.

While the registry override Allow Replication With Divergent and Corrupt Partner exists, it should never be treated as a quick fix. In modern virtualised infrastructure, the gold standard is always Path A: isolate the stale server, demote it, clean up directory metadata, and promote a fresh domain controller. Treating domain controllers as disposable infrastructure ensures directory consistency and eliminates lingering objects entirely.

Key takeaway: Event ID 2042 and error 8614 are directory self-preservation mechanisms designed to block lingering object resurrection. Always prefer decommission and metadata cleanup (Path A) over registry overrides; if you must surgically recover a DC (Path B), purge lingering objects using repadmin /removelingeringobjects before applying the temporary override, and remove the registry key immediately after synchronisation.
Next in this series

Active Directory Disaster Recovery: Diagnosing USN Rollbacks and Virtual Machine Snapshot Restorations.


Discover more from Karanth.ovh

Subscribe to get the latest posts sent to your email.